Tolinn Seal PLAST is a corrosion protection mastic based on the petrolatum, which can be formed by hand, self-supporting mastic used for cavities as well as the equivilzation of uneven surfaces at buried / above ground components, profiling irregular shapes to provide contours for subsequent tape wrapping. TOLINN SEAL PLSAST, due to its reinforcement with fillers materials and fiber, permits good moldability and stability.
Features
No primer Required for adhesion
Movements allowed
Virtually no surface preparation required
Easy application
Resistant to chemicals like salts, acids, alkalis, solvents
Cavity filler: TolinnSeal Plastis used to seal joints and tears, voids, cracks, flange connections. Perfect for profiling and molding. Tank bottom base sealing: In combination with other Tolinn materials to provide a waterproof tank base area sealing.
Special Advantages:
Seal cavities reliably
Solvent Free
For operating temperature of - 40 °Cto +110 °C
High plasticity
Excellent surface coating properties
Outstanding interaction with all tapes
Property
Typical Value
Test Method
Color
Gray
-
Processing Temperature
-10 °Cto +50 °C
-
Operating Temperature
-40 °C to +110 °C
-
Consistency
Soft, easily formable
-
Saponification number
< 2 mg(KOH)/g
DIN EN 12068
Shelf Life
Up to 5 years
-
Standard Qty
10 Kg Bucket
-
Surface must be clean surface free of rust and loose attachments dust, dirt, or other foreign matter should be removed. Use a non-residue cleaner such
as acetone.
Tolinn Seal Plast is petrolatum based corrosion prevention mastic.
TolinnSeal Plast will be applied manually or with a palette knife to the surface to be coated. For this purpose the mastic will be modelled in such a way
that cover tape can be seated over the coated area.
Store indoor, clean and dry, away from direct sunlight in a cool place below +50°C, shelf life up to 5 years
Handle with care, keep can up right
TolinnSeal Plast is available in
bucket
10 kg/ can
Additional packaging available up on request