Tolinn Feu is a cold processable corrosion prevention tape based on etrolatum anufactured by DENSO GmbH, Itis used for wide range of applications where corrosion is a problem. Consists of an impregnated polypropylene nonwoven carrier, which is coated on both sides with a corrosion prevention petrolatum
Tolinn Feu will be wrapped as insulation layer at least with one layer and, as corrosion prevention encasement, at least with two layers, which means
with 50% overlap.
Tolinn Feu is impermeable against water and oxygen and it is electrically insulating. Based on its exceptional properties combination
PLASTELEN-Feu can be processed with a layer-by-layer application for components that are formed complicated and for which a spiral wrapping is not possiable. During processing, the tape must be pressed evenly and the mastic must be spread especially in the overlaps.
Plastelen Feubonds to a wide range of surfaces including uncommon materials, such as EPDM, TPO, CSPE/Hypalon, most PVC, CPE, SBS, App modifieds, asphalt BURs, coal tar BURs, plus all metal, aluminum,
Galvanized steel, propylene, polystyrene, fiberglass, brick, concrete, masonry, OSB, etc.
|Dripping point of the mastic||≥100ºC||-|
|Specific electrical insulation resistance||≥100 Ohm m2||EN12068|
|Operating temperature||-57 DEC to > +150 Deg C||-|
|Shelf Life||Up to 5 years||-|
The surface must be free from dust and loose objects. Rust must be removed using a wire brush. Minimum degree of cleanliness(ISO 8501-1) St2.
Wind Petrolatum tape around the pipe or components with the required overlap and with no wrinkles. Then smooth down the Petrolatum tape with your hand and press it firmly into position
Store indoor, clean and dry, away from direct sunlight in a cool place below +50°C, shelf life up to 5 years
|Tolinn Feu is available in rolls of
various widths and lengths
|20mm X 10 mt
30mm X 10 mtr
50mm X 10 mtr
100mm X 10 mtr
200mm X 10 mtr